Alinco DJ-1400, Service Manual, Page: 2 / 46

SPECIFICATIONS
DJ-180
1) General
Frequency Coverage:
RX: 137.000 ~ 173.995MHz (T, TM version)
TX: 144.000 ~ 147.995MHz (T, TM version)
RX: 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version)
TX: 137.000 ~ 173.995MHz (TA, TB, TA2, TB2 version)
RX/TX: 144.000~145.995MHz(TS, TSA, TZ, E, EA, EB version)
Frequency Resolution: 5, 10, 12.5, 15, 20, 25kHz steps
Memory Channels: 10 Channels (standard)
Antenna Impedance: 50 ohm unbalanced
Signal Type: F3E(FM)
Power Supply Requirement:DC 5.5V~13.8V (Rated 7.2V Ni-Cd)
Dimensions:
Approximately 132(H) x 58(W) x 33(D) mm
Weight : Approximately 350g
2) Transmitter
Output Power.I
5.0W with Optional 12V Ni-Cd Battery
2.0W with Standard 7.2V Ni-Cd Battery
(144.000~147.995MHz)
(160.000~165.000MHz)... TA2, TB2 only
Modulation System: Variable Reactance Frequency Modulation
Max. Frequency Deviation: +/ -5kHz
Tone Frequency:
67.0 to 250.3Hz -38 Subaudible Encoding Tones
(E, EA, EB version: option)
DTMF Encoder: (TZ, EB version: option)
Tone Burst: (E, EA, EB version only)
3) Receiver
Receiver System:
Double-Conversion Superheterodyne
Intermediate Frequency.' 1st IF: 21.4MHz
2nd IF: 455kHz
Sensitivity: 12dB SINAD less than -10dBu
(144.000~17.995MHz)
(160.000~165.000MHz)... TA2, TB2 only
Page 2