To name a memory channel proceed as follows. In the memory read mode, select the channel
that you want to name. Push the FUNC key for more than 2 seconds. Repeatedly push the SQL
function key to cycle through the various set up functions. Stop when the letter A appears
flashing on the screen. Rotate the Tuning Knob to select the desired first letter of the channel
name. Push the VM key to enter the character. The same character that you just entered will
now appear flashing to the right. Again rotate the Tuning Knob to select the next character of
the name. Push the VM key to enter the character. Continue this process until the desired name
is entered, up to 7 characters. To complete the naming process, push the FUNC key.
