Align-Pilates Combo Chair II Assembly Instructions & User Manual Download Page 11

11

Complete your Studio

Warranty Return Procedure

The customer must call Align-Pilates or its authorized Distributor for authorization prior to returning 
the equipment. The customer is responsible for the cost of returning products to Align-Pilates (or 
their appointed Distributor) for warranty adjustment should this be deemed necessary. The 
customer is responsible for any damage or loss during shipment back to Align-Pilates (or their 
appointed Distributor). The customer is responsible for the cost of return freight to them in the 
event Align-Pilates decline to make a warranty adjustment. Align-Pilates do not accept 
responsibility for any items returned without a pre-approved authorization number, which must be 
clearly marked on the outside of the package. 

Limitation of Liability

The above is our exclusive warranty and is in lieu of all other warranties, express or implied, includ-
ing warranties of merchantability or fitness for any purpose. In no event shall Align-Pilates or their 
Distributors be liable for incidental, consequential or punitive damages.

Contact Information

This warranty is issued by Align-Pilates Equipment Ltd, 430 Enterprise Way, Vale Park, Evesham, 
Worcs WR11 1 AD, UK.  Tel: + 44 1386 425920. www.align-pilates.com. (V.5 Aug 2018)

For further information or queries on the Combo Chair II please call your distributor or alternatively call our UK customer care 

team on +44(0)1386425923 or email [email protected] or visit our website www.Align-Pilates.com

Align-Pilates offers a full range of commercial quality Pilates apparatus, at the most competitive 
prices in Europe.

Of course, there is nothing like experiencing Pilates apparatus first hand and finding out what it is 
really like. We actively encourage visits to our showrooms at our UK headquarters which are open 
for viewings Mon - Fri - simply call us to make an appointment. Please call us for a copy of our 
brochure on +44(0)1386425923.

Summary of Contents for Combo Chair II













Reviews: