Water resistance IP68
The watch is designed to be waterproof to the IP68
standard. However, we strongly recommend that you
avoid to the contact with water to the maximum extent
possible.
Microscopic cracks in the seal may occur during the use of
the watch due to impact or wear of the case. In this case,
water may get inside watch and cause a damage not
covered by the warranty.
Never dive, bathe or shower while wearing your watch -
pressurized water or hot water could penetrate the watch
and cause damage not covered by the warranty. Never
press the buttons while the case is in contact with water,
as this could cause water ingress and damage that is not
covered by the warranty.
Troubleshooting
You can find answers and instructions for solving the most
common problems directly in the GloryFit app on the "Me"
tab, under the
Frequently asked questions
item.
Alerts do not appear on the watch
Please make sure you have granted GloryFit app the access
to notifications according to above instructions (see
chapter
Notification setting
). Alternatively, open the
phone settings and enter "
access notifications
" into the
search box and make sure access is turned
on
for GloryFit.
The watch does not connect
If you are unable to connect the watch to your phone, try
turning Bluetooth Off and then On on your phone and/or
restarting your phone.
