Processor liquid-cooling assembly
Removing the processor liquid-cooling assembly
Prerequisites
1. Follow the procedure in
Before working inside your computer
WARNING: Despite having a plastic shield, the processor liquid-cooling assembly may be very hot during normal
operation. Ensure that it had sufficient time to cool before you touch it.
CAUTION: To ensure maximum cooling for the processor, do not touch the heat transfer areas on the processor liquid-
cooling assembly. The oils in your skin can reduce the heat transfer capability of the thermal grease.
2. Remove the
.
3. Remove the
4. Remove the
5. Remove the
.
About this task
The following images indicate the location of the processor liquid-cooling assembly and provides a visual representation of the
removal procedure.
36
Summary of Contents for Aurora R11
