Alienware Area-51 Threadripper Edition R7, Service Manual

Page: 57 / 140

Replacing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer . After working inside your computer, follow the instructions
in After working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Procedure
1 Align the notch on the bottom of the memory module with the tab on the memory-module slot.
2 Insert the memory module into the memory-module connector until the memory module snaps into position and the
securing clip locks in place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Post-requisites
1 Replace the left and right side-panels. See “ Replacing the side panels ”.
2 Replace the stability foot .
57