Alienware Area-51 R3 Threadripper Edition, Service Manual

Page: 50 / 199

Removing the right AlienFX side-
panel connector
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
Procedure
1 Lay the chassis on the left side.
2 Disconnect the right AlienFX side-panel cable that connects the right
AlienFX side-panel connector to the I/O board. See “
I/O-board components ”.
3 Remove the screw (#6-32x6) that secures the right AlienFX side-panel
connector assembly to the chassis.
50