Alienware Area-51
®
m15x
1
Battery Voltage Indicator Button ()
Press this button and release to see the battery pack’s remaining power.
Battery Voltage Indicator (3)
The battery pack voltage indicator estimates how much battery power is remaining.
Press the button once and release. One to five LEDs will illuminate. No illumination
indicates no power (not charged) and five illuminated LEDs indicate full power
(completely charged). Note: This indicator will also illuminate once you insert the
battery pack.
Battery Lock (4)
The battery lock is used to keep the battery pack secured. When the battery pack is
inserted, it will automatically lock. To remove the battery pack, slide this spring lock
until the battery pack lifts up slightly and then lift the battery pack out.
Rear Side
Refer to the diagram below to identify the components on this side of the Mobile
System.
Battery Pack (1)
The battery pack is automatically charged when the Mobile System is connected to
an AC power source and maintains power to the Mobile System when AC power is not
connected. This allows use when moving temporarily between locations. Battery time
varies by usage and by the specifications for this Mobile System. The battery pack
cannot be disassembled and must be purchased as a single unit.
Summary of Contents for Area-51 M15x
