UPMIDIAS
Removing the display back-
cover
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
After working inside your computer
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
.
2
Remove the
3
Remove the
4
Remove the
.
5
Follow the procedure from step 1 to step 11 in “Removing the
6
Remove the
7
Remove the
.
8
Follow the procedure from step 1 to step 4 in “Removing the
”.
9
Remove the
10
Remove the
11
Remove the
Procedure
1
Note the display-board cable routing and remove the cable from the
routing guides on the display back-cover.
99
Summary of Contents for 15 R2
Page 55: ...UPMIDIAS 8 Disconnect the interposer from the hard drive 1 interposer 2 hard drive 30...
Page 72: ...UPMIDIAS 5 Lift the touch pad off the palm rest assembly 1 palm rest assembly 2 touch pad 47...
Page 159: ...UPMIDIAS 4 Lift the battery off the computer base 1 screws 2 2 battery 3 computer base 134...
Page 162: ...UPMIDIAS 1 computer base 137...
