Alienware 15 R2, Quick Start Manual

Page: 102 / 173

UPMIDIAS
Removing the display
assembly
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel .
2 Remove the memory modules .
3
Remove the solid-state drives .
4 Remove the wireless card .
5 Follow the procedure from step 1 to step 11 in “Removing the palm rest ”.
6
Remove the hinge covers .
Procedure
1 Close the display and turn the computer over.
2
Remove the antenna cables from the routing guide on the computer base.
77