Aliencopter Studio All Rights Reserved. www.aliencopter.com
20
/
31
Attach Electric Equipment to main Frame
The ALIENCOPTER FLYMAN pack includes only the gimbal and the main frame. Therefore, please consult your
electric equipment providers for specific requirements before assembling under the following instructions. The
suggestive assembling instructions provided in this document only apply under the most common circumstances.
Aliencopter Studio shall bear no responsibility for any electric products that are not provided by us.
Install the IMU Mount
There are two types of IMU installation, the installation of integrated IMU and independent IMU, which share the
same installation solutions. This document will elaborate only on independent IMU installation.
The IMU mounting plate needs to be fixed on 4 anti-vibration rubber balls, the
size of which fits most of the flight controls or IMU. During installation, attention
needs to be paid to the direction in which IMU should be installed. In the image
on the right, the triangular arrow icon points to the direction where the aircraft is
heading and IMU needs to be installed in the center of the IMU mounting plate, as
this is also the center of the main frame. The image below displays the correct
IMU installation. The red arrow points to the front of IMU, and also the same
direction the triangle arrow on IMU mounting plate pointing to
The instructions above only apply to IMU installation under most circumstances. If there are any conflicts between
this document and the installation guide provided by the flight control manufacturers, please proceed the
installation according to your manufacturers’ version.
