12
07/11/2019
EN
CHARGING THE PRODUCT FOR THE FIRST
TIME
• Press
« ON/OFF »
button on the base of the lamp to switch
off the LED before charging.
• Connect the adapter to the charging socket in the base
of the lamp. Then plug the charger in. The charging
light will be red.
• For the first recharge, the lamp must remain on charge for
8 hours. Subsequently the battery will take approximately
6 hours to recharge.
LED BEHAVIOR
•
RED :
charging.
•
LED off :
battery charged
OR
adapter not plugged.
USING THE LAMP
Simply press the
« ON/OFF »
switch to light up, switch off and change the intensitie of the lamp.
• To light up : press the switch button once.
• To change intensity press again (3 light intensities).
• Press again to turn off the lamp.
CLEANING
• Clean the lamp with a damp cloth. Do not use detergents or any other chemical products as they could
damage the lamp’s cover.
• Do not expose the charger to water.
ELECTRICAL DATA
CHARGER :
100~240V AC, 50–60 Hz — 7,5V DC, 600mA
BATTERY :
Li-Po, 3,7V, 2400mAh
This lamp is fully protected against dust and splashing water. It is intended for indoor and out-
door use. The charger is designed for indoor use ONLY away from moisture. Not to be charged
outdoors.
HOW TO USE
ON/OFF
ON/OFF