3
www.observint.com
© 2016 Observint Technologies. All rights reserved.
2.
In the PTZ control panel, scroll down the Preset list to
Preset95
, click the entry to highlight it, and
then click the
Call
icon. See below. The OSD
MAIN MENU
screen will open.
PTZ control panel
Preset95
Call
icon
NOTE
The PTZ control panel direction buttons and the
Iris +
and
Iris -
keys are used to navigate the
OSD menu and set configuration options in the camera.
OSD menu navigation
For the ALIBI Recorder
: Navigation and settings in the OSD are made through direction keys and the
Iris
+
and
Iris -
buttons in the ALIBI QVR PTZ Control panel. See below.
Direction keys
Iris+ Iris–
Iris+ Iris–
Direction keys
ALIBI QVR PTZ Control panel
ALIBI QVR remote access PTZ control panel
For remote access to the ALIBI QVR
: Navigation and settings in the OSD are made through direction
keys and the
Iris +
and
Iris -
buttons in the ALIBI QVR PTZ control panel. See above.
The function of the directional keys and Iris buttons are defined in the table below.
Keys
Function
p
Move up in the parameter list
q
Move down in the parameter list.
t
Move to previous page, field, or move the camera left.
Keys
Function
u
Move to next page, field, or move field right.
Iris+
(OPEN)
Set parameter value, or open sub-menu
Iris–
(CLOSE)
Cancel change of parameter.
OSD Definitions: On-screen Display (OSD) menus
After the camera is installed on a compatible recorder, you can open the OSD menu clicking the PTZ Control
icon on the Quick Setting Toolbar.
To navigate the OSD menu and select options:
•
Move the cursor up/down to select the menu item.
•
Move the cursor left/right to adjust the value of the selected item.
•
Click the
OK
key to confirm a selection.
FORMAT menu
Move the cursor to FORMAT, and click the menu button to enter the FORMAT sub-menu to select the
format of camera. Camera settings in the recorder must match the option selected in the camera.
MAIN MENU
AE (Auto Exposure)
AE describes the brightness-related parameters. You can adjust the image brightness by the BRIGHTNESS,
EXPOSURE MODE, and GAIN in different light conditions.
•
BRIGHTNESS
: Brightness refers to the brightness of the image. You can set the brightness value from
1 to 10 to darken or brighten the image. The higher the brightness value, the brighter the image.
•
EXPOSURE MODE:
You can set AE mode as GLOBAL, BLC, and WDR.
—
GLOBAL
: GLOBAL refers to the normal exposure mode, used when adjusting for unusual lighting
distribution, variations, non-standard processing, or conditions of under exposure to get an
optimum image.
—
BLC
(Backlight Compensation): BLC compensates light to the object in the front to make it clear,
while compensating for over-exposure of the background where the light is strong. The level can
be adjusted from 0 to 8.
—
WDR
(Wide Dynamic Range): The wide dynamic range (WDR) function helps the camera
provide clear images even under back light circumstances. WDR balances the brightness level of
the whole image and provide clear images with details.
