4
www.observint.com
© 2014 Observint Technologies. All rights reserved.
NOTE
Some computer security software may attempt to block you from running
WebComponents.exe
. If
necessary, open the Internet Explorer downloads list, right click on the WebComponents.exe file name,
then click
Run Anyway
.
b.
In the
Setup - WebComponents
window opens, click
Next
to continue.
Installing the WebComponents plugin may require that you close the browser. Follow the
on-screen instructions, then restart your browser after the installation is finished.
c.
Allow the plug-in installation to complete. When the following window appears, click
Finish
.
After logging into the camera, the Live View - Main stream window will appear.
Screen select tabs
Live View options
Logout button
Live View image
NOTE
: You can also observe video from the camera by plugging the Video Test Monitor cable into the
connector in the camera, then attaching it to a spot monitor.
Step 4. Adjust the camera for your surveillance target
1.
Observe the Live View screen to adjust the direction of the camera. To adjust the camera pan, grasp
the camera gimbal on both sides at the pivot point, then rotate the as shown in the left illustration
below.
Camera gimbal
pivot point
Camera gimbal
pivot point
Pan adjustment
Tilt adjustment
To adjust the tilt, rock the gimbal as shown above in the right illustration.
2.
Unscrew the Wide - Tele and Near - Far adjustment levers about 1/4 turn, then adjust the lens zoom
and focus as needed. Tighten the levers screws until snug to hold them in place.
Wide (W) /Tele (t)
zoom control
Near (N) / Far (F)
focus control
Video test
monitor
cable
connector
3.
Reattach the camera dome assembly.
Step 5. Setup the video image
The video Display Settings menu includes the image-related configurable parameters for the camera. It
contains several sub-menus such as Image Adjustment, Exposure Settings, Day/Night Switch, etc. that can
be opened or closed for compactness. Additionally, several adjustments can be seen in the Live View image
on the menu. To open the Display Settings menu, go to
Setup
tab
| Image | Display Settings
