3
www.observint.com
© 2015 Observint Technologies. All rights reserved.
b.
Modify the network settings to values compatible with the subnet where it is installed.
c.
Enter the
admin
password for the device in the password field. By default, the
admin
user password for Alibi cameras is
1111
.
d.
Click the
Save
button. The new IP address, port, and other settings will appear in the list
with the device you modified.
6.
Close the Alibi Discover Tool by clicking the
Close
icon (
T
) in the upper-right corner of the
screen.
Step 4. Remote login
To access the camera from a computer on the LAN:
1.
Open your Microsoft Internet Explorer browser on your compute and enter the IP address of the
camera in the URL field. In the example below, the IP address of the camera is 192.168.75.76.
2.
In the login window, enter your
User Name
and
Password
in the appropriate fields, then click
Login
. The default
User Name
and
Password
for Alibi cameras is
admin
and
1111
.
3.
If this is the first time you are logging into a camera at this IP address AND you are using Internet
Explorer 10 or newer, you must configure it for Compatibility mode:
a.
In Internet Explorer, click the Tools icon (located to the right of the tabs), then select
Compatibility View settings from the drop-down menu.
Tools icon
b.
In the Compatibility View Settings window, ensure that the IP address of your camera is in
the
Add this website
field, then click
Add
.
c.
After clicking
Add
, the IP address will appear in the Websites list. Click
Close
.
4.
If this login is the first login to an Alibi camera from your computer and browser, continue with
the following sub-steps to install WebComponents:
a.
After a successful login to the NVR, a message will appear in the middle of the Live View
window requiring you to load a plug-in. Click on the message to continue, then click
Run
in the pop-up block at the bottom of the screen.
