Alia ADP9000 Series, Operation Manual

Page: 11 / 11

ADP9000 Operation Manual OPADP9000.1.1.5.R1ENG
11
4.5 How to set the Engineering Unit for display & output
Example 1: Display in %, Output 4~20mA
1. Press
SET
button for 3seconds then release,it will go to Sub 0 ,press
SET
Buttom.
2. Press or until the display show mA, press SET go back to Sub 0 (setting output is mA)
3.Press
SET
again, Click or until the display show %, press press
SET
go back to Sub 0
4.Press
ESC
go back to normal display, now you can see the % and both show on the diplay, means the output
is 4~20 mA, display engineer unit is %.
Example 2: Display in Mpa, Output 4~20mA linear
1. Press
SET
button for 3seconds then release, it will go to Sub 0 , press
SET
Buttom.
2. Press or until the display show mA, press
SET
go back to Sub 0 (setting output is mA linear)
3.Press SET again, Click or until the display show Mpa, press SET go back to Sub 0
4.Press ESC go back to normal display, now you can see the Mpa show on the diplay, means the output is
4~20 mA linear, display engineer unit is Mpa.
Example 3: Display in mA, Output 4~20mA
1. Press SET button for 3seconds then release,it will go to Sub 0 , press SET Buttom.
2. Press or until the display show mA, press
SET
go back to Sub 0 (setting output is mA)
3.Press
ESC
go back to normal display, now you can see the and mA both show on the diplay, means the
output is 4~20 mA, display engineer unit is mA.
Example 4: Display in mA, Output 4~20mA linear
1. Press
SET
button for 3seconds then release,it will go to Sub 0 , press
SET
Buttom.
2. Press or until the display show mA, press
SET
go back to Sub 0 (setting output is mA linear)
3.Press ESC go back to normal display, now you can see the mA show on the diplay, means the output is
4~20 mA linear, display engineer unit is mA.