WASH TEMP 150
O
-160
O
FINAL RINSE TEMP 180
O
-195
O
POWER
OFF
DRAIN
START
CYCLE
ON
DISHMACHINES
6
3
-20
¯
1
180UC
Quick Setup
Instructions
WARNING
: Electrical and plumbing
connections need to be made by a
qualified service technician and
comply with all available Federal,
State and Local Health, Electrical,
Plumbing and Safety codes.
The Spirit of Excellence
an Ali Group Company
After filling dishwasher for the first time,
(CAUTION:
turn power supply off)
reconnect the factory
unplugged wire to booster high-limit switch located
behind front panel.
8
STEP
CMA PN: 10130.02
180UC FRONT VIEW
Turn on power, push Fill Button to fill the Booster
Tank on initial start up. Listen for final rinse until
water cascades into scrap trap.
Turn power switch on, press and hold fill switch, fill
to correct level in wash tank.
7
STEP
FILL
Turn power supply back on. Allow machine to heat up
(about 5-15 minutes). Cycle machine by pushing start
switch. Observe “Rinse Cycle” (last 16 seconds of
cycle) must be minimum 180°F. If necessary adjust
the temperature by turning the adjustment stem on
thermostat clockwise to increase.
STEP
9
NOQDUDMS
D@SHMFKDLDMSC@L@FD~
SGD®µGD@SDQLTRSAD
EHKKDCVHSGV@SDQADENQD
SGDGD@SHMFDKDLDMSHR
DMDQFHYDC NQSGHRQD@RNM
SGDHFGHHLHSVHSBGG@R
HMSDMSHNM@KKXADDM
CHRBNMMDBSDC@SSGD
E@BSNQX@MCVHKKQDPTHQD
QD§BNMMDBSHNM
DET
5$
35,0(
¶
7
6
8
STEP
