Algostim Algovita 4300, User Manual, Page: 14 / 36

10
Trial Stimulator Manual
EPG Description
EPG Description
Figure 2.
EPG button and status lights
The button on the EPG ( Figure 2 ) allows you to turn the EPG on and off and turn stimulation off.
Turn stimulation on using the Clinician Programmer or one of the patient programmers. The lights
on the EPG allow you to verify if the EPG or stimulation is on or off.
• EPG On/Off — Turn the EPG on or off by pressing the button for 5 seconds.
•
Quick Stimulation Off —
Turns stimulation off by pressing the button for 2 seconds.
•
Stimulation On/Off Light —
Check if stimulation is on or off.
•
EPG Battery Status Light —
Check if the EPG is on and the battery charge level is above
25% (flashes green) or below 25% (flashes red).
•
Ground Pad Connector Port—
This port is used to connect an optional (electrophysiology)
ground pad to the EPG. The ground pad is required with the use of the Algostim Computer
Aided Stimulation Programming (CASP) feature. See the
Clinician Programming Manual
for instructions on using CASP.
Ground Pad Connector Port
EPG On/Off
and Quick Stimulation Off
EPG Battery Status Light
Stimulation On/Off Light