ALGE-Timing D-LC, Manual, Page: 3 / 4

Lapcounter
ALGE-TIMING
– D-LC 3
E100930
Table of Contents
1
Available Systemcomponents: ..........................................................................................3
2 Functions...........................................................................................................................3
2.1 Switch between Countup and Countdown .................................................................3
2.2 Countup (00) ..............................................................................................................4
2.3 Countdown (99) .........................................................................................................4
3 Powerpack ........................................................................................................................4
1 Available Systemcomponents:
•
Scoreboard with 1, 2 or 3 digits, single, double or tripple-sided with built-in powerpack
and charger
•
Manual switch 023-02
•
Tripod for Lapcounter (TRI128 or TRIMAN depending on the Lapcounter model)
•
Mains cable (to charge the built-in battery)
•
Bell (only for type D-LCB)
2 Functions
Countup: count up from 0
Countdown: count down from set number
2.1 Switch between Countup and Countdown
From Countup to Countdown:
•
Countup display must show 00 – after switching on or after reset keep the manual
switch pressed for at least 5 seconds until 00 is shown
•
Keep switch pressed until 99 is shown on the display (the first 9 is blinking)
From Countdown to Countup:
•
Countup display must show set countdown value – after switching on or after reset,
keep the manual button pressed for at least 5 seconds until 00 is shown
•
Press switch until 00 is shown on the display.