Alfresco AGBQ-30, Replacement Manual, Page: 6 / 34

Page 6
Barbeques cont.
10– To replace the rotisserie orifice, it must be accessed from the back of your barbeque unit. Just like
the Sear-Zone™ and the smoker unit, the rotisserie unit has an externally mounted orifice con-
nected to the valve body with a long flexible stainless tube. Remove the rear rotisserie access plate
(Figure 10) and locate the orifice on the compression fitting that is mounted on the burner bracket
( Figure 11) . Replace orifice and re-install the access cover.
(Figure 10)
(Figure 11)
COMPRESSION FITTING
FLEXIBLE TUBING
ORIFICE
BRACKET
ACCESS
COVER
SIDE BURNERS:
Side burners can be found as separate items such as the AGSB-2 (2 burner unit) and AGSB-SZ
(Sear-Zone™ unit) or built within the frame of the barbeque such as our AGBQ-56 model Deluxe Grill.
There are two types of side burners units. Units manufactured until 2002 have side burner units
that has been discontinued, yet conversion kit are still available. Units built starting on 2003 have all
components available.
Refer to the appendix area of this publication for detail description of each
individual side burner model . In either case, their respective orifices are installed and accessed in the
same fashion. If a side burner is part of a barbeque such as the Deluxe Grill, gas will be supplied to the
burner from the same manifold that feeds the main unit.
Also please note that all Individual units have their own pressure regulators.
If the side burner is part of a Deluxe Grill, the manifold will be accessed in the same fashion as
shown on page# 4 — item # 7. For all other side burners units, follow the next few steps.
IGNITER WIRE