12
Desciption
The magnetic drill stand can be attached to ferromagnetic workpieces using the installed mechanically switchable
TML permanent magnet (D). For this purpose, the magnetic lever (G) must be pressed downwards and the safety
tab (F) must latch into place correctly. A self-adjusting dovetail guide (C) which the collar (A) is attached to can be
vertically adjusted using the star handle (H). Wired, mains-operated drilling machines can be fixed tightly to this
collar (Ø 43 mm).
As an additional torque support there is a nose on the collar in order to engage the drilling machine into the collar.
The type plate and an attachment possibility for the Allen keys included can be found on the back of the machine.
A) Tool holder (Ø 43 mm)
G) Lever for magnet
B) Quick clamping lever
H) Star handle
C) Slide and setting screws
for adjustment on the back
D) Magnetic base
E) Recess for safety belt
F) Safety tab