S e i t e
4 | 6
7. Operation
To make the best use of the air purifier, please place and adjust it properly according to air pollution period and area.
Method of Operation
Connect the power: Connect the power, the unit will start to work when it is plugged in. The initial mode will be high
speed (without ionizer function).
On/Off Button: Press the power button, the unit will be switched off/on.
If the unit is switched on, the high fan speed is activated and could be changed then.
Fan Speed Button: Press the button for selection of fan speed. The LED screen will indicate one sign for low speed,
two for medium and three for high.
Ionizer Button: Press the button for Ionizer, the indicator will be shown on the control panel, indicating the selection
preferred.
Time setting Button: To enable the timer function, press the button once to get the time flashing as 0:00 on the LED
screen. With further press the time will increase in an interval of 30 minutes till 8 hours the longest. The unit will submit
the setting in 3 seconds with the signs of clock and will then light up the rest time steadily.
External timer: It can be connected with external timer to set the working time. The unit has to be switched on. The
initial mode when switched on is high speed. The external timer is not included in the scope of delivery.
Remote Controller
(1)
Power on - off
(2)
Auto function button
(3)
Ionizer function button on - off
(4)
Fan speed low – middle - high
(5)
IF-Transmitter
(6)
Child lock button
(7)
Timer on - off
(8)
Timer settings
(9)
Sleep mode
Operation by using the Remote Controller
Child Lock Button: The Child Lock function enables the air purifier to be locked, (which will also lock the power
button), and avoid any accidental operation by children or unauthorized usage. To reset the unit to Open Lock
Mode, the unit needs to be switched off and switched on again. During locked mode, the lock indicator will be
shown on the display.
Auto Function Button: The Auto function button, which is on the remote control, when enabled, will allow the
Ionizer function to be switched on at 30 minutes intervals with medium fan speed.
Time Setting Button: Press the Time Setting Button, the flashing signs of clock and 0:00 will appear on the LED
screen. Press the "+" or "-" for desired time setting, the time will increase from 30 minutes to 8 hours, the longest.
Once the desired time has been set, press the time button to activate. The sign of clock and 0:00 will then light up
steadily. If the time setting button is not pressed, the time set will not be activated. To reset the time, you may
press the time setting button again.
Sleep Mode Button: The Sleep Mode Button will enable the unit to work in low speed mode with the sleep
indicator light displayed on the unit and the fan speed mode indicator light dimmed.
The usage of the Power button, Ionizer as well as the Fan Speed Mode button on the remote control is the same
as those on the units control panel.
