ALFAtron MUH44N, User Manual, Page: 18 / 36

4K 4x4 HDMI Matrix Switcher
13
No.
Switcher
Status
EDID information
Embedded EDID data
1 0001 720P 2D 5.1CH
2 0010 720P 3D 5.1CH
3 0011 720P 2D 2CH
4 0100 720P 3D 2CH
5 0101 1080P 3D 5.1CH
6 0110 1080P 2D 5.1CH
7 0111 1080P 3D 2CH
8 1000 1080P 2D 2CH
9 1001 2160P 2D 5.1CH
10 1010 2160P 2D 2CH
Customized EDID data
12 1100 Customizable
13 1101 Customizable
14 1110 Customizable
Note:
1) EDID information listed in the above chart is factory default data. Embedded
EDID data can be updated by sending command UpgradeIntEDID[x].
2) Embedded EDID data can also be invoked via command EDID/[x]/[y].
4.3 TCP/IP Control
4.3.1 Control Modes
TCP/IP default settings: IP is 192.168.0.178, Gateway is 192.168.0.1, and Serial Port is
8080. IP can be changed as you need, Serial Port cannot be changed.

Controlled by single PC
Connect a computer to the TCP/IP port of the 4x4 HDMI Matrix Switcher-N, and set its
network segment to the same as the default IP of the 4x4 HDMI Matrix Switcher-N
(192.168.0.178).