- 6 -
ALF-WP70T/RS
.
6.2
Receiver Panel
No.
Name
Function Description
1 Power LED
When the product is powered on, the red LED
indicator will be on.
2 DC 24V
DC 24V power supply port.
3 FW
Firmware update port.
4 HDBaseT IN
Connect to the HDBaseT OUT port of the Transmitter
with a CAT6/6a/7 cable.
5 HDMI OUT
HDMI output port, connect to HDMI display device.
6 HDMI IN
HDMI input port, connect to HDMI source device.
7 AUDIO OUT
Analog audio output port.
8 RS-232 port
Connect to PC or control system for bidirectional
RS-232 control signal pass-through.
Note:
This transmitter supports automatic/manual mode for source signal input. In
manual switching mode, press the SOURCE button to select HDMI/ USB-C input
source.
In automatic switching mode, the last connected or the currently connected
source signal will be selected automatically. When both HDMI and USB-C ports are
connected to active signal, HDMI signal input takes preference. When both HDMI
and USB-C ports are not connected to an active signal, it will switch to the source
signal of the Receiver.