Match Remote Control (two match ways)
Use the controller’s Match key
Match
:
Short press match key, immediately press on/ off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match
:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
.
Delete
:
Switch off the power, then switch on power again,
immediately short press on/ off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete
:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/ delete w ays. Tw o options are offered for selection:
AFR-17, AFR-8-5 Ultrathin Touch Wheel RF Remote Controller
●
AFR-17 1 zone RGB+CCT remote
R/ G/ B
Mode
Multi-color wheel
Brightness
RGB Color
Color temperature
Speed/ Saturation
On/ Off
Scene
Brightness
:
Adjust brightness, short press 11 levels,
long press 2s get max or min brightness.
at the same time, multi-color wheel become brightness wheel.
On/ Off: Short press turn on/ off light.
Mode: Switch dynamic mode, short press run the next mode,
long press 2s run mode cycle.
Speed/ Saturation:
For dynamic mode, adjust mode speed,
short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation,
namely change current static color to mixed white slowly,
short press 11 levels,
long press 1-6s for continuous 256 levels adjustment.
Operation
●
W hen light is on, touch the color wheel
,
the indicator will display red.
●
To extend battery life, no touch or press key operation after a few seconds,
the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
To fix the remote, two options are offered for selection:
Option 1: fix the remote' back holder on the wall with two screws.
Option 2: adhere the remote' back holder to the wall with paster.
Key function
User Manual Ver 1.0.2
www.alfaled.sk
Page 2