S afety information
1. Read all instructions carefully before you begin this installation.
2. W hen installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
W hen remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Match Remote Control (two match ways)
Use the controller’s Match key
Match
:
Short press match key, immediately press on/ off
key of the remote.
Use Power Restart
Match
:
Switch off the power, then switch on power again,
immediately short press on/ off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete
:
Switch off the power, then switch on power again,
immediately short press on/ off key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Delete
:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/ delete w ays. Tw o options are offered for selection:
Color: Change static RGB color.
Short press get 24 kinds static color, long press for continuous static color adjustment.
1
R 100%
9
G 100%
21
R 100%
B 100%
17
B 100%
25(1)
R 100%
5
R 100%
G 100%
13
G 100%
B 100%
Speed / Saturation:
For dynamic mode, adjust speed.
Short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation, namely change current static color to mixed white slowly.
Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
RGBW light:
long press Mode
+
Speed/ Saturation key to adjust W channel brightness simultaneously.
AFP-F1, AFP-F1-2, AFP-F2, AFP-F3 4-Key Panel RF Remote Controller
User Manual Ver 1.0.2
www.alfaled.sk
Page 4
