Alfa Romeo ALFA 159 2010, Owner'S Handbook Manual

Page: 194 / 338

181-222 Alfa 159 GB 3-12-2009 14:10 Pagina 193
after reaching the tyre pressure spec-
ified in paragraph “Wheels” in sec-
tion “Technical Specifications”, start
driving immediately;
WARNI NG
Apply the sticker in a
fig. 19 fig. 20
visible position for the
A0 E02 1 3m A0 E0 21 7m
driver to indicate that the tyre
make sure the compressor switch A- if after 5 minutes it is still impossi-
has been treated with the
fig. 19
is set to
0
(off), start the ble to reach at least 1.5 bar, disen-
quick tyre repair kit. Drive
engine and fit plug A-fig. 20 into gage compressor from valve and cur-
carefully especially when cor-
the outlet/cigar lighter on the front rent outlet, then move the car forth
nering and do not exceed 80
console and then turn on the com- for approx. 10 metres in order to dis-
km/h. Avoid heavy braking
pressor by setting switch A-fig. 19 tribute the sealing fluid inside the tyre
and accelerating.
to
I
(on); evenly, then repeat the inflation op-
eration;
Inflate the tyre to the pressure speci-
fied in paragraph “Wheels” in sectionIf after this operation it is still im-
after driving for about 10 minutes
“Technical Specifications”. Check tyre possible after 5 minutes to reach at
stop and check again the tyre pres-
pressure on gauge B-fig. 19 with least 1.8 bar, do start driving since
sure; pull up the handbrake ;
compressor off to obtain precise read- the tyre is excessively damaged and
ing;
the quick tyre repair kit cannot guar-
antee suitable sealing, contact Alfa
Romeo Authorized Services;
193