Alfa Romeo 4C Spider 2020, Owner'S Manual

Page: 151 / 164

TECHNICAL SPECIFICATIONS 149
FLUIDS AND LUBRICANTS
E
NGINE
NOTE:
* The following are essential to ensure correct operation and prevent serious damage to the engine: only use spark plugs of the same make and type,
which are specially certified for such engines that strictly comply with the spark plug replacement interval given in the maintenance schedule. For spark
plug replacement, it is advisable to contact the dedicated Alfa Romeo Dealership. Refer to “Scheduled Servicing” in “Servicing And Maintenance” for
the required spark plug intervals.
C
HASSIS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant – 1750 Turbo Engine
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula
OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material
Standard MS.90032.
Engine Oil – 1750 Turbo Engine
We recommend you use SAE 5W-40 API Certified Synthetic Engine Oil, meeting the requirements of
FCA Material Standard MS-12991.
Engine Oil Filter – 1750 Turbo Engine We recommend you use Mopar Engine Oil Filter.
Spark Plugs – 1750 Turbo Engine We recommend you use Mopar Spark Plugs. *
Fuel Selection – 1750 Turbo Engine Use Only 91 Octane or higher (R+M)/2 Method, 0-10% Ethanol.
Component Fluid, Lubricant, or Genuine Part
Alfa Twin Clutch Transmission

Gearbox: Full synthetic 75W-85 manual transmission fluid meeting MS.90021 or
FPW9.55550–MZ3 or the API GL4 specification.

Control System: Use only Mopar C Series DDCT SAE 75W Hydraulic Fluid or equivalent.
Failure to use the correct fluid may affect the function or performance of your transmission.
Brake Master Cylinder
We recommend you use Mopar DOT 4 meeting MS.90039. If DOT 4 brake fluid is not available,
then DOT 3 is acceptable.
DOT 4 brake fluid must be changed every two years regardless of mileage.
8
20_4C_OM_EN_USC_t.book Page 149