Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two
seconds
4. Place turn signal in
neutral state.
Right turn light is OFF.
Left turn light BLINKS.
5. Turn left turn signal
switch ON.
Right turn light BLINKS.
Left turn light is ON
SOLID.
6. Place turn signal in
neutral state.
Right turn light BLINKS.
Left turn light is OFF.
7. Turn right turn signal
switch ON.
Right turn light is ON
SOLID.
Left turn light BLINKS.
8. Place turn signal in
neutral state.
Right turn light is OFF.
Left turn light BLINKS.
9. Turn left turn signal
switch ON.
Right turn light is ON
SOLID.
Left turn light is ON
SOLID.
10. Turn left turn signal
switch OFF. (Turn Signal
Switch Must be placed
in Neutral State).
Right turn light is OFF.
Left turn light is OFF.
Customer Action
Customer Will See
NOTE:
Each step MUST BE held for at least two
seconds
11. Turn ignition STOP/
OFF/LOCK.
12. Turn ignition MAR/
ACC/ON/RUN. (Entire
sequence needs to be
completed within one
minute or sequence will
need to be repeated).
System is now reset and
the engine may be
started.
Turn hazard flashers
OFF (Manually).
If a reset procedure step is not completed within 60
seconds, then the turn signal lights will blink and the
reset procedure must be performed again in order to be
successful.
5
SAFETY
121
Summary of Contents for 4C SPIDER 2018
