Connecting WiFi-CampPro 2 to Remote WiFi HotSpot Station
After logging-in, device wizard will scan hotspot signal.
Results of hotspot signal scan will be displayed on the screen.
How to Start WiFi-CampPro 2 Device Configurations
When device portal page is connected, to ensure security of device access,
please setup device management password, and click “
Submit
”.
Connecting WiFi-CampPro 2 to Remote WiFi HotSpot Station
- Select the target access point / hotspot site.
- Click on the arrow icon at the end of the column.
- Insert WiFi password to connect to the target hotspot.
CampPro WiFi settings
- In “
SSID
” and “
Password / Passkey
” columns, setup a preferred name and
Wi-Fi password for users/device to connect to
CampPro Wi-Fi Extender Router
.
- Click “
Finish
” device will start to connect the target hotspot / wireless access
point, and its connection status will be shown.
WiFi-CampPro 2 Connection Status
Once the wireless connection with target hotspot/access point is established,
the connection status will be shown in the status screen.
Clients connected with Camp Pro Wi-Fi Extender Router status is shown at
second column.
4
5
6
Clicking on the “
Status
” on left control panel will refresh machine run-time status.
This guide introduces instructions and tips for device first-time installation.
This guide is not intended to be a substitute for the user's manual.
For more product information, please visit ALFA website for latest product
news, and updates.
Please setup login password (minimum 5 characters) when using device for the very
first time.
CampPro Wi-Fi Extender Router
default parameters :
Default Device Access :
wificamppro2.myalfasetup.com
or 192.168.36.1
Default User Name :
admin
Default Password :
defined by user
Default SSID :
WiFiCampPro2-xxxxxx
Default Wireless Encryption Type :
None
If password lost or forgotten, while device is ON, press
RESET
button on the
bottom for 10 seconds then release. Wait for one minutes, device will reboot
with factory default settings and please repeat the log-in process to setup new
management password.
When the target hotspot is password-protected, please contact hotspot service
provider to obtain connection parameters.
