background image

31466441EN-00

8

Alfa LU-VE is a trademark registered and owned by LU-VE Group. 

Alfa LU-VE reserves the right to change specifications without prior notification. 

2.  Product label - coil

Product code 

Product serial nr.

Communicate these when 

ordering spare parts as 

they identify the unit

PED Category

According to PED

Max DN

Maximum diameter of the 

distributor tube

Fluid

Refrigerant

Ps

Design pressure

Pt

Test pressure

Coil Ts

Range of operating tem-

peratures for the coil

Test date

Date on which the coil has 

been pressure tested in the 

factory

5.307

ATTENZIONE!

CIRCUITO FRIGORIFERO PRECARICATO CON AZOTO

WARNING!

PRECHARGED REFRIGERANT CIRCUIT WITH NITROGEN

ACHTUNG!

VERLADTER KÄLTEMITTELKREISLAUF MIT STICKSTOFF

ATTENTION!

CIRCUIT FRIGORIFIQUE PRE-CHARGE AVEC AZOTE

BHИМАНИЕ

!

СИСТЕМА ЗАПРАВЛНА АЗОТОМ

3. Nitrogen precharge warning

Units are delivered from the manufacturer 

with an overpressure. Check pressure on 

the Schrader valve. With unpressurised unit: 

Immediate report to manufacturer and note on 

bill of delivery.

Manufactured by

AIR HEX ALONTE S.R.L.

via delle Albere 5, 36045, Alonte(VI)

HEAT EXCHANGER

Coil Code: 

**********

Manuf. Date:

09-2021

PED CAT ART 4.3

Max DN:

Fluid Group:

15

2

PS min/max:

PT:

-1/60.0 bar

90 bar

TS min/max:

Test Date:

-60/125 °C

09-2021

SN: 8166445

Product Code:

ARCTIGO

ISD632-166CEX60SR444M8YL

MADE IN ITALY

EXAMPLE

EXAMPLE

4. Warning sign for fans and fan type

Airflow direction:

D= draw-through

Rotation direction:

L= left 

R= right

Type DL

5. Fan rotation

Sticker indicates fan rotation direction.

6. Electrical warning

Electrically powered component. Switch off 

power supply before any maintenance or instal-

lation activity.

Fluid

Product 

Serial nr.

PED category

Pt

Test date

Product code

Coil code

Ts

Ps

Max DN

Summary of Contents for LU-VE Arctigo ISD

































Reviews: