Alfa Network bbrobot, User Manual

Page: 91 / 116

91
Pantone 1805
Pantone 423
EN
• Do not heat foods for longer than the recommended time, as it could encourage the growth of
microbes in the food.
• Suitable for all types of baby bottles (low, high, wide or thick, glass, plastic, rubber or silicone
teats and dummies).
• Baby bottles and jars must always be open (they must be of glass, polycarbonate or polypro-
pylene).
• Do not heat full bottles.
How to use:
• Fill the preparation jug or any other jug with a measuring beaker with the amount of water
required (see water dose table) and pour that water into the pail (the water always at room
temperature).
• Place the preparation jug and the cooking basket in case of:
Heating/Defrosting Foods: foods to be heated must be always placed in a jar without its
lid (the jug or any other glass, polypropylene or polycarbonate jar). The jar
will be placed inside the basket.
(Should you wish to heat/defrost two jars, place the second jar over the support grate)
(Add the jug extension whenever necessary)
Sterilising baby bottles or dummies: The products to be sterilised must be placed
inside the basket. Always top down.
• Whenever needed, the support grate and jug extension may be added, as it will provide an
increased capacity.
• Cover the basket with the jug extension and the lid.
• Plug in the cord into the wall power socket and turn on the On/Off switch. If the assembly has
been properly locked, the 3 pictograms (steam, blend, vacuum sealing) will light up in
green. Otherwise, for safety reasons, the robot will not work until it has been fixed firmly into
place once again).
• Pressing the steam symbol. The process will automatically start after 3 sec after being selected
(the steam indicator will light up in blue).
• When the process has finished, the steam indicator will change to a flashing red light,
indicating that the robot is hot (2 mins).
• When the steam function has finished, the red steam indicator turns off, 2 consecutive beeps
will be heard indicating that it has finished. The 3 pictograms (steam, blend, vacuum sealing)
will automatically light up in green, indicating that any function is ready to be used.
Pantone 1805
Pantone 423