3.2.7
Access Control
At Access Control page
1.Set Deny list or
Allow list to control the
service
3.2.8
Easy Config
EasyConfig only works in a pair of AWAP02O-1W
It automatically setup two devices to AP and AP client.
There are two methods to setup (button/Q&A)
3.2.8.1
Button mode
2.Select button
1.Enable EasyConfig
3. After setup AP and AP client in both devices.
Press the button of AP till LED sparkling. Then
press the button of AP client till LED sparkling.
After a period of time, AP client will set SSID,
security and connect to AP automatically
