64
Trap Configuration
A trap manager is a management station that receives traps, the system alerts
generated by the switch. If no trap manager is defined, no traps will issue.
Create a trap manager by entering the IP address of the station and a community
string. To define management stations as trap manager and enter SNMP community
strings and selects the SNMP version.
1.
IP Address :
enter the IP address of trap manager.
2.
Community :
enter the community string.
3.
Trap Version :
select the SNMP trap version type – v1 or v2
4.
Click “Add”.
5.
To remove the community string, select the community string that you have
defined and click ”Remove” . You cannot remove the default community string
set.
Summary of Contents for AFSG-2242
