ALFA LAVAL UNIQUE RV-ST VALVE INSTRUCTION MANUAL—REV 8/21
3 Installation
Study the instructions carefully.
The valve is supplied as separate parts to facilitate welding.
The items refer to the parts list and service kits section.
Check the valve for smooth operation after welding.
3.5 Recycling information
•• U
Unnppaacckkiinngg
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps
- Wood and cardboard boxes can be reused, recycled or used for energy recovery
- Plastics should be recycled or burnt at a licensed waste incineration plant
- Metal straps should be sent for material recycling
•• M
Maaiinntteennaannccee
- During maintenance, oil and wear parts in the machine are replaced
- All metal parts should be sent for material recycling
- Worn out or defective electronic parts should be sent to a licensed handler for material recycling
- Oil and all non-metal wear parts must be disposed in accordance with local regulations
•• S
Sccrraappppiinngg
- At end of use, the equipment must be recycled according to relevant, local regulations. Besides the equipment itself, any
hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in the
absence of local regulations, please contact your local Alfa Laval sales company
DO NOT DISASSEMBLE
kg
!
Do N
NO
OTT attempt to disassemble the actuator due to spring under load danger!
SPRING UNDER LOAD
kg
!
If marked with this warning, do N
NO
OTT attempt to cut the actuator open, due to spring under load danger!
18
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | [email protected] | 417.831.1411
