3 Installation
Study the instructions carefully.
The valve is supplied as separate parts to facilitate the welding.
The items refer to the parts list and service kits section.
Check the valve for smooth operation after welding.
Step 1
Always install valves with more than one valve body so that the
seals between the valve bodies can be replaced. Do not weld
more than one valve body into the system.
Valve size
A (inch)
B (inch)
1
½
”
*
30.7
2”
*
31.5
2
½
”
*
31.1
3”
*
35.8
4”
*
35.4
* Depending on body combination and piping solution.
B (incl. top unit)
A*
TD 461-015_1
Step 2
Assemble the valve in accordance with the steps on page 27.
Pay special attention to the warnings!
TD 461-630_1
TD 461-631_1
Step 3
Pre-use check:
1. Supply compressed air to the actuator.
2. Open and close the valve several times to ensure that it operates smoothly.
Pay special attention to the warnings!
NC
NO
Air (Two Step stroke)
Air (Main movement)
Air (Main movement)
Air (Two Step stroke)
Open/close!
Open/close!
2200-0042
2200-0081_1
12
