Instruction Manual, Toftejorg MultiJet 40
Page 21
IM-TE91A170-EN041
Maintenance and Repair
(Continued)
Gear Assembly
Note
: It is important that the Screw holding the Pinion is fastened to a torque moment of 5 Nm to
secure it from loosening.
4. Insert 1st stage Worm wheel (pos. 33) and Horizontal shaft (pos. 27). Mount Washer (pos. 13),
Spring washer (pos. 16) and fix with Screw (pos. 15). Check rotation.
5. Reinstall Turbine shaft (pos. 6) against 1st stage Worm wheel and tighten Screws (pos. 15) in
Horizontal shaft (pos. 27) and Pinion (pos. 9).
6. Hold Turbine shaft (pos. 6) against 1st stage Worm wheel and tighten Screws (pos. 15) in
Horizontal shaft (pos. 27) and Pinion (pos. 9).
7. Remove Turbine shaft (pos. 6) with O-ring (pos. 35) with Slide bearing (pos. 28) before Gear
subassembly is inserted in machine body.
ï
Return to menu
