Alfa Laval SSV, Instruction Manual

Page: 8 / 56

ALFA LAVAL UNIQUE SSV STANDARD VALVE INSTRUCTION MANUAL—REV 3/19
2 Safety
All warnings in the manual are summarized on this page.
Pay special attention to the instructions below so that severe personal injury and/or damage to the valve are avoided.
IInnssttaallllaattiioonn
A Allw waayyss read the technical data thoroughly (see section )
A Allw waayyss release compressed air after use
N Neevveerr touch moving parts if the actuator is supplied with compressed air
N Neevveerr touch the valve or the pipelines when processing hot liquids or when sterilising
N Neevveerr dismantle the valve with valve and pipelines under pressure
N Neevveerr dismantle the valve when it is hot
!
N Neevveerr cut the actuator open, due to spring under load
- if marked with this warning
WARNING
SPRING UNDER LOAD
DO NOT ATTEMPT TO CUT ACTUATOR OPEN
REFER TO SERVICE BULLETIN
!
AND
SPRING UNDER LOAD
Do not attempt to cut open
kg
!
Do N NO OTT attempt to disassemble the actuator due to spring under load danger !
DO NOT DISASSEMBLE
kg
!
O Oppeerraattiioonn
N Neevveerr dismantle the valve with valve and pipelines under pressure
N Neevveerr dismantle the valve when it is hot
A Allw waayyss read the technical data thoroughly (see section )
A Allw waayyss release compressed air after use
N Neevveerr touch the valve or the pipelines when processing hot liquids or when sterilising
N Neevveerr touch moving parts if the actuator is supplied with compressed air
A Allw waayyss rinse well with clean water after cleaning
!
A Allw waayyss handle lye and acid with great care
M Maaiinntteennaannccee
A Allw waayyss read the technical data thoroughly (see section )
A Allw waayyss release compressed air after use
N Neevveerr service the valve when it is hot
N Neevveerr service the valve with valve and pipelines under pressure
N Neevveerr stick your fingers through the valve ports if the actuator is supplied with compressed air
N Neevveerr touch moving parts if the actuator is supplied with compressed air
A Allw waayyss use Alfa Laval genuine spare parts
!
N Neevveerr cut the actuator open, due to spring under load danger
- if marked with this warning
WARNING
SPRING UNDER LOAD
DO NOT ATTEMPT TO CUT ACTUATOR OPEN
REFER TO SERVICE BULLETIN
!
AND
SPRING UNDER LOAD
Do not attempt to cut open
kg
!
Do N NO OTT attempt to disassemble the actuator due to spring under load danger !
DO NOT DISASSEMBLE
kg
!
TTrraannssppoorrttaattiioonn
A Allw waayyss ensure that compressed air is released
A Allw waayyss ensure that all connections are disconnected before attempting to remove the valve from the installation
A Allw waayyss drain liquid out of valves before transportation
A Allw waayyss use predesigned lifting points if defined
A Allw waayyss ensure sufficient fixing of the valve during transportation - if specially designed packaging material is available, it
must be used
8
CONTACT CSI FOR MORE INFORMATION | CSIDESIGNS.COM | SALES@CSIDESIGNS.COM | 417.831.1411