Page 14
Instruction ManualToftejorg TZ-66
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A300-EN9
Installation and Normal Operation
(continued)
1.
Clamp machine firmly in a vice. Protect machine with rubber pad under the machine and use
rubber jaws on the vice. Mount jaws upside down to ensure firm grip on the machine. Set torque
wrench at the specified tightening torque.
2.
Hold one nozzle with flat spanner to counteract while tightening the opposite nozzle with the
torque wrench.
Recommended tightening torque: 50 Nm
3.
Check that the machine is in operating condition by inserting hex Screwdriver (tool No. TE134A) in
screw in top of Turbine shaft and easily turn Turbine shaft clockwise. If any resistance is
recognised, the machine should be disassembled to localise the cause.
Rubber jaw mounted
upside down
Protect with rubber
pad
