3 Installation
Read the instructions carefully and pay special attention to the warnings! Always check the pump before operation.
- See pre-use check in section 3.3 Pre-use check - pump without impeller screw.
The large pump sizes are very heavy. Alfa Laval therefore recommends the use of a lifting crane when handling the pump.
Step 4
1. Ensure that the pipelines are routed correctly.
2. Ensure that the connections are tight.
Remember seal rings!
3001-0007
Few bends
Correct!
Step 5
Avoid stressing the pump.
Pay special attention to:
-
Vibrations.
-
Thermal expansion of the tubes.
-
Excessive welding.
-
Overloading of the pipelines.
3001-0008
!
Note
In case of shaft seal leakage, the media will drip from the slot in the bottom of the adaptor. In case of shaft seal leakage, Alfa
Laval recommends putting a drip tray underneath the slot to collect the leakage.
11
PH: 403.720.0999
