Alfa Laval LeviMag, Instruction Manual, Page: 43 / 68

8 Technical data
8.3 Drive unit data – IE4 standard blue
Gear motor:
Gear:
High efficiency helical bevel right angle gear motor
Surface finish: Paint coat 3.0 standard
RAL 5010 Gentian blue
Maximum mounting angle:
α
= 0°-22° or
α
= 23°-45°
Angle intervals based on configuration
See section 8.8 Mounting angle
Note: Motor may not point downwards
Lubricant: Food compatible oil
Gear motor oil: USDA H1
Motor:
Efficiency class:
IE4
Enclosure/motor protection: IP66
Country code: All (one type covers all)
Motor type: Integrated Permanent Magnet Synchron Motor
Motor data: See table 1. Motor data in section 8.10 Connection of motor
Frequency converter:
Integrated Permanent Magnet Synchron Motor (IPMSM) which must be operated with a frequency converter for IE4 motors.
The frequency converter (not Alfa Laval supply) must be ordered for the voltage available at the location of operation.
Supply from frequency converter to motor:
217 VAC, 3.59 A
8.4 Drive unit data – IE4 clean room
Gear motor:
Gear:
High efficiency helical bevel right angle gear motor
Surface finish: NSD TupH Advanced
Maximum mounting angle:
α
= 0°-22° or
α
= 23°-45°
Angle intervals based on configuration
See section 8.8 Mounting angle
Note: Motor may not point downwards
Lubricant:
Food compatible oil
Gear motor oil: USDA H1
Motor:
Efficiency class:
IE4
Enclosure/motor protection:
IP66
Country code: All (one type covers all)
Motor type: Integrated Permanent Magnet Synchron Motor
Motor data: See table 1. Motor data in section 8.10 Connection of motor
Frequency converter:
Integrated Permanent Magnet Synchron Motor (IPMSM) which must be operated with a frequency converter for IE4 motors.
The frequency converter (not Alfa Laval supply) must be ordered for the voltage available at the location of operation.
Supply from frequency converter to motor, WP50:
199VAC, 2.53A
Supply from frequency converter to motor, WP81: 195VAC, 3.61A
43