Page 30
Instruction Manual, Gunclean Toftejorg TZ-750 Fixed & Portable
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A400-EN7
Maintenance and Repair
(continued)
Replacement of Collar Bushes
1.
Place Gear frame (pos. 31) upside down with a firm support under the flange. Use for instance jaws of
a vice. Do not clamp on machined surfaces. With Pusher (tool No. TE81B031, see page 36) knock out
Collar bush.
2.
Turn Gear frame to upright position and hold over support such as flat steel bar clamped in a vice.
Knock out Collar bush with Pusher.
3.
Turn Gearframe 90
a nd hold ove r s up p ort. Kno ck ou t C olla r b us h with P u s h e r.
Warning:
To avoid risk of deforming Gear frame, it is utmost important that it is supported
while the Collar bushes are being knocked out.
4.
Remove all remains of old Araldite etc. Holes must be perfectly clean before mounting new Collar
bushes. Rinse with chemical cleaner.
5.
Coat new Collar bushes with CIBA-GEIGY two component Standard blue Araldite and push into Gear
frame.
6.
To hold Collar bushes in correct position, insert fixtures (tool No. TE81B032, see page 36) and let
harden according to instructions.
Summary of Contents for Gunclean Toftejorg TZ-750
Page 2: ......