background image

7 General information

Study the instructions carefully and pay special attention to the warnings!

7.1

Service and repair

Upon every return of a product, no matter if for modifications or repair, it is necessary to contact your local Alfa Laval office to
guarantee a quick execution of your request.

You will receive instructions regarding the return procedure from your local Alfa Laval office. Be sure to follow the instructions
closely.

7.2

Warranty

The warranty conditions are subject to the legal warranty period of 12 months from the date of delivery. In case of improper use,
modifications of or damages to the device, we do not accept warranty claims. Damaged devices will also not be accepted.
Furthermore, defects due to normal wear are not subject to warranty services. When exchanging parts, only original replacement
parts, released from the manufacturer, must be used.

7.3

How to contact Alfa Laval Kolding A/S

For further information please feel free to contact:

Alfa Laval Kolding A/S

31, Albuen - DK 6000 Kolding - Denmark
Registration number: 30938011
Tel switchboard: +45 79 32 22 00 - Fax switchboard: +45 79 32 25 80
www.toftejorg.com, www.alfalaval.dk - [email protected]

Contact details for all countries are continually updated on our websites

11

Summary of Contents for COR













Reviews: