background image

AHE00053EN 1904

7

Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB. 

Alfa Laval reserves the right to change specification without prior notification. 

5. Fan direction

Sticker indicates fan rotation direction.

10. Lifting lug

Use all marked lifting lugs when lifting from 

above.

6. Electrical warning

Electrically powered component. Switch off 

power supply before any maintenance or instal-

lation activity.

Spare part

item no

9460088799

8. Fan motor

Fan motor item number.

11. & 12. In/Out

Refrigerant connections inlet and outlet.

IN

OUT

9. Grounding

It is mandatory to ground the unit. The yellow/

green grounding wire must be left longer than 

the others, to ensure that it is the last one to be 

detached from the terminals in the event of the 

cable being pulled.

13. Eurovent

Sticker is applied when the product is included 

in the Eurovent Certify All program.

7. Moving parts

Warning: moving parts.

Switch off power supply before any mainte-

nance or installation activity.

PARTI INTERNE IN MOVIMENTO A

COMANDO AUTOMATICO.

TOGLIERE TENSIONE PRIMA DI TOCCARE

AUTOMATIC CONTROL MEANS MOVING

INTERNAL PARTS.

SWITCH OFF POWER BEFORE TOUCHING

SCHALTUNG AUF AUTOMATIK, INTERNE

BAUTEILE IN BETRIEB. VOR ARBEITSBEGINN

SPANNUNG UNTERBRECHEN

ÉLÉMENTS INTERNES A DÉMARRAGE

AUTOMATIQUE. COUPER L’ALIMENTATION

ÉLECTRIQUE AVANT INTERVENTION

Cod. 69100175

Summary of Contents for Alfa-V VDD Series





















Reviews: