10
Attaching the Switch to the Actuator
1. Remove the position indicator on the top of the actuator (1).
2. Attach the bracket (10) to the top of the actuator using four bolts
(11).
3. Insert the switch stem through the center hole in the bracket (10)
and align with the slot in the actuator shaft.
4. Attach the top of the bracket (10) to the switch using four bolts
(9).
Attaching the Actuator to the Valve
These instructions describe how to attach an assembled actuator to a Tri-
Clover Ball Valve. For information on servicing your electric or pneumatic
actuator, refer to the service manual that comes with the actuator.
To attach the actuator to the valve:
1. Remove handle nut and handle.
2. Sizes ½” through 2”, attach actuator bracket to valve body using
4
bolts provided in kit.
3. Place actuator coupler onto the valve stem.
4. Place actuator on the mounting bracket. (on sizes 3” and 4”
valves the bracket is included on all valves as partof the body)
Be sure to line up coupler with actuator. Tighten all bolts.
5. Instal 4 actuator mounting bolts through bracket and into the bot
tom of the actuator. Tighten all bolts.
2. Maintenance
2.4 Attaching the actuator and switch to the valve
ï
Return to menu
