Alfa IN aXe 250 PULSE Smart (AL)GAS, Instruction Manual, Page: 21 / 31

21/31
ALFA IN a.s. © www.alfain.eu
Fig. 9 – Curves of modes
SECONDARY PARAMETERS MENU
From start the welding machine is set to factory settings (default). For most of
the work it is not appropriate to change the secondary parameters. Secondary
parameters for manual and synergistic methods are identical.
1. Simultaneously pressing V20 and V5 encoder enters the menu for
secondary parameters.
2. Encoder A5 selects a parameter (ISP, PRG, PoG, brn), V16 encoder
sets the desired value.
3. Press the encoder V5 to confirm the change.
4. Press any button, or after 10 s, to exit the menu without saving changes.
5. Secondary parameters are common for methods manual and synergy.
Synergy method allows to set more secondary parameters.