32
Fig. 2
• Remove the lime filter by extracting
it from its slot (fig. 3). Carefully
wash the filter under running
water. (see paragraph: Lime filter
maintenance).
Fig. 3
• Re-insert the filter in its slot.
(fig. 4).
• Fill the kettle with water up to (but
not beyond) the MAX level mark.
Add two tablespoons of bicarbo-
nate and bring to boil (see next
paragraph: How to use the electric
kettle).
Repeat the procedure twice to
make certain that the kettle is clean
and to remove any odours that
might affect the taste of the water.
HOW TO USE THE ELECTRIC
KETTLE
Power supply base
• To extend the cable, flip
over the power supply
base and unroll the
cable from the
winder.
Adjust
the cable to the
length needed to reach the electrical
outlet by using the feeds in the base
(fig. 5).
• Place the kettle correctly on the
power supply base so that the cable
extends from the slot on the kettle
(fig. 6).
Fig. 6
Attention: The power supply base
must always be placed on a flat and
stable surface.
• Insert the plug from the power sup-
ply base into the electrical outlet.
Attention: Do not let the cable hang
over the work surface (fig. 7).
Fig. 4
Fig. 5
MDL06 Bollitore_MicheleDeLucchi_14.indd 32
22/08/18 17:51