1
Quick Start Owner's Manual (English)
Quick Setup for the Roadfire
y
Make sure all items listed on the front of this guide are in the Roadfire's box.
y
Read the Important Safety Instructions document included with the Roadfire.
y
Study the Hookup Diagram below.
y
Make sure all equipment is turned off and all gain knobs are set to zero.
y
Connect your guitar and other equipment to the Roadfire in the manner
illustrated below.
y
Plug in all devices and turn them on.
Note
: Leave the Roadfire plugged in for at
least eight hours before operating it under battery power for the first time.
y
Turn the EFFECT knob to the PLAY position. Use the PROGRAM
UP/DOWN buttons to audition all of the Roadfire's built in effects.
y
When finished, turn off the amp before disconnecting any equipment to
prevent damage to the speaker.
y
Go to http://www.alesis.com to register the Roadfire.