6
Editing Layer Parameters
To adjust the pitch of a sample:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the TUNE area by pressing the
Cursor Up
or
Cursor Down
buttons.
3.
Then press the
Cursor Left
or
Cursor Right
button
to adjust the tuning. [-4, -3, -2, -1, 0, 1, 2, 3, 4]
To adjust the reverb level of a sample:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the REV (Reverb) area by pressing the
Cursor Up
or
Cursor Down
buttons.
3.
Then press the
Cursor Left
or
Cursor Right
button
to
adjust the reverb level. [0-10]
To adjust the sensitivity of the pad or ext. trigger:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the SENS (Sensitivity) area by pressing the
Cursor Up
or
Cursor Down
buttons.
3.
Then press the
Cursor Left
or
Cursor Right
buttons
to adjust the sensitivity level. [1-8]
To adjust the volume level of a sample:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the LEV (Level) area by pressing the
Cursor Up
or
Cursor Down
buttons.
3.
Then press the
Cursor Left
or
Cursor Right
button
to adjust the level. [0-10]
To adjust the panning of a sample:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the PAN area by pressing the
Cursor Up
or
Cursor Down
button.
3.
Then press the
Cursor Left
or
Cursor Right
button
to adjust the pan position. [L4, L3, L2, L1, CTR, R1, R2,
R3, R4]
To adjust the MIDI note sent by the Trigger Location:
1.
Strike a pad or ext. trigger.
2.
Move the cursor to the MIDI area by pressing the
Cursor Up
or
Cursor Down
button.
3.
Then press the
Cursor Left
or
Cursor Right
button
to adjust the MIDI note number. [00-127]
Note:
The MIDI note does not have an effect on the internal sound.
