background image

   

 

   

   
 
 
 
 
   

 
 

 
 
 
 

 

 

 
 
 
 
 

Specifications 

 

Sound Engine 

Sound Generation: 
Alesis proprietary DSP Analog Modeling 
Polyphonic Voices:   
8, each with 3 oscillators, 2 multi-mode filters, 3 envelope 
generators, 2 LFOs, programmable effects send and 
modulation matrix. 
 
Program Memory: 
512 Preset Programs, 32 Multi-timbral Setups, all 
user-rewritable 
 
Effects: 
4 Drive Effects (1 each per Part) plus Master Effects (Shared) 
 

Audio Input 

Input Connectors: 2 Balanced 1/4” TRS jacks 
Maximum Input Level: +5.2dBu (1.41VRMS) = -0dBFS 
Input Impedance: 10k

Ω

 

 

Audio Output 

Output Connectors: 4 Impedance-Balanced 1/4” TRS 

jacks, ¼ ” TRS Headphone Jack 

Maximum Output Level: +18dBu (6.17 VRMS) = -0dBFS 
Output Impedance: 1k

Ω

 

 

Audio Performance 

Signal To Noise Ratio: >95 dB A-weighted, Ext In to Main 

or Aux Out 

THD+N: < 0.005%, External In to Main or Aux Out 

Frequency Response: 20-20kHz

±

0.20dB, External In to 

Main or Aux Out 

Power Consumption: 12 Watts max (100-240VAC/50-60Hz) 
 

Physical 

Keyboard:  37 keys (velocity, release velocity sensitive) 
Real-Time Controllers: 3 360-degree Parameter Knobs, 2 

Assignable Modulation Sliders, 
Assignable Pitch Wheel, 

Pedal Jacks: Assignable Exp pedal jack, Sustain pedal jack 
MIDI Connections: MIDI In, MIDI Out, MIDI Thru 
Audio Outputs: Main L/R , Aux L/R, Headphone (1/4” TRS) 
Dimensions (WxHxD): 22.75” x 2.75” x 7.75” / 577.85 x 

69.85 x 196.85 mm 

Weight:   8.25 lbs / 3.5 kg 
 

Volume 

The (volume) knob on the far left-hand side of the Micron 
raises and lowers 
the volume.  If you don’t hear anything as you play the 
Micron, 
suspect the (volume) knob’s setting. 
 

Real-time controllers 

The (m1) and (m2) sliders, (pitch) wheel, and (x/y/z knobs), 
located on the left half of the Micron, provide real-time 
control of 
the Micron’s sounds. 
 

Performance buttons 

The buttons in this cluster switch octaves, set the tempo, and 
perform other performance-related functions. 

SERVICE  MANUAL

 

MODEL:Q02 

Summary of Contents for Micron










































Reviews: